12 May
2018
12 May
'18
8:04 p.m.
So in terms of including the monitor in your setup it looks like from the
manual you'll have to connect your mic to the desk as usual. You'll then
need a cable back from a monitor or aux feed on the desk. Ideally this
will want to be seperate from the band mix. If you have a signal splitter
or a second output on a radio mic receiver you can send a signal directly
to the monitor (this is what I do with my setup) - this makes my monitor
entirely isolated from anything except my signal.
Physically the monitor you have can be mounted on a second mic stand fairly
easily , I'd do that and have it pointed at me and not on the floor so as
to make it as localised as possible.
Bob
On Sat, May 12, 2018 at 5:52 AM, J L Korr via Callers <
callers(a)lists.sharedweight.net> wrote:
Hi friends,
After years of calling at most venues without a caller's monitor, and
finding life much easier at the occasional venues that did provide a
caller's monitor, I finally sprung for my own monitor. Recalling a
recommendation some time ago either on this list or one of the others, I
bought a Roland Cube Monitor (CM-30). But having read through the manual
and looked over the unit itself, I realized I don't know what to do with it
to put it to use in this context. I consulted with the sound person for my
next upcoming gig, but that sound person (whom I do appreciate for many
reasons) has limited sound skills and also wasn't sure.
Those of you who know more than me on this subject: Is there
straightforward guidance that would help me use this unit as a caller's
monitor? Or, did I buy the wrong unit for this function despite having good
intentions?
Thanks in advance,
Jeremy Korr
Rancho Cucamonga, CA
_______________________________________________
List Name: Callers mailing list
List Address: Callers(a)lists.sharedweight.net
Archives: https://www.mail-archive.com/callers@lists.sharedweight.net/